En la presente investigación, referido al análisis y diseño estructural
sismorresistente de un edificio multifamiliar de 4 niveles en la localidad de
Pebas, Loreto, se ha desarrollado un proceso general para la elaboración
de un proyecto estructural usando las herramientas BIM Revit y Robot
Structural por medio de la interoperabilidad a través de un modelo analítico.
Se plantea aprovechar la aplicación de esta metodología (BIM), ya que
supone una ventaja al reducir tiempo, aumentar la eficiencia, transparencia
y eliminar errores en el proceso del análisis y diseño estructural. Para la
validación del proyecto se usó la herramienta BIM Robot Structural, y se
generó un modelo en ETABS, comparándose los resultados.
Se determinó el máximo desplazamiento lateral de la estructura (0.0034m)
en la dirección “Y”; de los resultados del análisis estático, dinámico y modal,
se concluye que la estructura es regular y rígida con periodos de vibración
de 0.57s, y 0.48s en la dirección del eje “X” y “Y”, respectivamente.
Todos los análisis y cálculos de diseño del proyecto se realizaron de
acuerdo con las normas del Reglamento Nacional de Edificaciones: NTE
E.030 (Diseño sismo resistente), NTE E.020 (Norma de Cargas), NTE
E.060 (Norma para el diseño en concreto armado) y la NTE E.050 (Suelos
y Cimentación).
In the present investigation, referred to the earthquake-resistant structural
analysis and design of a 4-story multifamily building in the town of Pebas,
Loreto, a general process has been developed for the elaboration of a
structural project using the BIM tools Revit and Robot Structural by means
of interoperability through an analytical model.
It is proposed to take advantage of the application of this methodology
(BIM), since it is an advantage by reducing time, increasing efficiency,
transparency and eliminating errors in the process of structural analysis and
design. For the validation of the project, the BIM Robot Structural tool was
used, and an ETABS model was generated, comparing the results.
The maximum lateral displacement of the structure (0.0034m) in the "Y"
direction was determined; from the results of the static, dynamic and modal
analysis, it is concluded that the structure is regular and rigid with vibration
periods of 0.57s, and 0.48s in the "X" and "Y" axis direction, respectively.
All the analyses and design calculations of the project were carried out in
accordance with the norms of the National Building Regulations: NTE E.030
(Seismic Resistant Design), NTE E.020 (Load Norm), NTE E.060 (Norm for
the design of reinforced concrete) and NTE E.050 (Soils and Foundations).